Insulated Bulk Containers
High-insulation pallet containers are suitable where high insulation demands are made for example when no cooling equipment is available or in conditions where the temperature is either very high or very low. The high-insulation pallet container will keep the content at a stable temperature or when needed, at a temperature as low as approximately – 18°C. Download our Fishing Concept Manual here.
PUR Insulated containers type IP-70 standard PUR
Dimensions (mm): 750x480x380
Internal dimension (mm): 683x415x290
Capacity (l): 70
Weight [kg]: 15
Standard: 2 drain holes
It is not recommended to use insulated tubs for freezing purposes because of the possibility of their constructional damages. Throwing frozen goods into insulated tubs is forbidden, any damages caused by sharp edges or weight of frozen pieces will not be covered by warranty.
PUR Insulated containers type IP-100 standard PUR
Dimensions (mm): 812x533x430
Internal dimension (mm): 743x464x330
Capacity (l): 100
Weight [kg]: 15
Standard: 2 drain holes
It is not recommended to use insulated tubs for freezing purposes because of the possibility of their constructional damages. Throwing frozen goods into insulated tubs is forbidden, any damages caused by sharp edges or weight of frozen pieces will not be covered by warranty.
PUR Insulated containers type IP-250 standard PUR
Dimensions (mm): 1015x700x758
Internal dimension (mm): 875x508x615
Capacity (l): 250
Weight [kg]: 25
Standard: 2 drain holes
It is not recommended to use insulated tubs for freezing purposes because of the possibility of their constructional damages. Throwing frozen goods into insulated tubs is forbidden, any damages caused by sharp edges or weight of frozen pieces will not be covered by warranty.
PUR Insulated containers type IP-310 standard PUR
Dimensions (mm): 915x715x710
Internal dimension (mm): 865x665x575
Capacity (l): 310
Weight [kg]: 41
Standard: 2 drain holes
It is not recommended to use insulated tubs for freezing purposes because of the possibility of their constructional damages. Throwing frozen goods into insulated tubs is forbidden, any damages caused by sharp edges or weight of frozen pieces will not be covered by warranty.
PUR Insulated containers type IP-660 NW standard PUR
Dimensions (mm): 1230x1030x750
Internal dimension (mm): 1165x965x600
Capacity (l): 660
Weight [kg]: 55
Standard: 2 drain holes optional bottom reinforcement
It is not recommended to use insulated tubs for freezing purposes because of the possibility of their constructional damages. Throwing frozen goods into insulated tubs is forbidden, any damages caused by sharp edges or weight of frozen pieces will not be covered by warranty.
PUR Insulated containers type IP-1000 standard PUR
Dimensions (mm): 1470x1180x890
Internal dimension (mm): 1390x1100x725
Capacity (l): 1000
Weight [kg]: 70
Standard: 2 drain holes
It is not recommended to use insulated tubs for freezing purposes because of the possibility of their constructional damages. Throwing frozen goods into insulated tubs is forbidden, any damages caused by sharp edges or weight of frozen pieces will not be covered by warranty.
PUR Insulated containers type IP-460 standard PUR
Dimensions (mm): 1230x1030x580
Internal dimension (mm): 1165x965x430
Capacity (l): 450
Weight [kg]: 41
Construction: closed, 2 skids, 4 drainage holes, 2’’ plugs
Material: NEW PE-1A
Insulation: PE foam
Standard: 2 drain holes
Colour: beige
Insulated containers type IP-600 PE Heavy Duty
Dimensions (mm): 1200x1000x750
Capacity (l): 600
Weight [kg]: 55
Construction: closed, 2 skids, 4 drainage holes, 2’’ plugs
Material: NEW PE-1A
Insulation: PE foam
Colour: beige
Insulated containers type IP-630-1 PE
Dimensions (mm): 1200x1000x785
Capacity (l): 637
Weight [kg]: 55
Construction: closed, 2 skids, 4 drainage holes, 2’’ plugs
Material: NEW PE-1A
Insulation: PE foam
Colour: beige
Insulated containers type IP-660-2 PE
Dimensions (mm): 1230x1030x750 (+/- 3%)
Capacity (l): 645
Weight [kg]: 65 (+/- 1%)
Construction: closed, 2 skids, 4 drainage holes, 2’’ plugs
Material: NEW PE-1A
Insulation: PE foam
Colour: beige
Variants of execution: - 1-4 drain plugs or completely plugged
- bar code insert
Insulated Meat Trolleys for Food Processing
Dimensions (mm): 820x720x700 mm
Construction: 4 wheels
Weight [kg]: 22
Material: PE
Colour: beige
Description: bottom and walls closed, filling, reinforcement, and insulation PE
It is not recommended to use insulated tubs for freezing purposes because of the possibility of their constructional damages. Throwing frozen goods into insulated tubs is forbidden, any damages caused by sharp edges or weight of frozen pieces will not be covered by warranty.
IPG Fish Cage Special
Fish Cage for storing of Stockfish
IPG Fish Cage is a smart and logistical solution for storing Stockfish. The Fish Cage is hot-galvanized. Each Fish Cage l cage includes 1 pallet bottom, 2 loose frames, and 2 distance beam. On top of the bottom, the pallet is applied with hot-galvanized mesh. The frames can be stored in an empty fish cage when the cage is not in use. The pallets can be stacked on each other to save space. Please download the Fishing Conceptmanual
Dimension mm | 1200 x 1000 |
Height (outside) mm | 2000 |
Load capacity kg | 500 |
Logistical adapted
The IPG Fish Cage for Stockfish is logistically adapted. You can save a lot of space when the fish cage is not in use without the season. We can design the IPG Fish Cage on request in other dimensions.
Height double stack mm | 3963 |
Number of pallet base in height | 12 |
Height of pallet base mm | 2243 |
Frames in an empty cage pcs | 20 |
IPG Fish Cage for Stockfish pallet bases logistically adapted
Fish Cage for Stockfish with 2 side walls
When Stock Fish Cage is not in use it is logistically adapted
Fish Cage for Stockfish double stacked
Increase the comfort of employees
Box Tipper B-MB-200
The B-MB-200 tipper is a model that has been designed to tilt barrels filled with both loose products and liquid. The special shape of the tray prevents overflows of liquid on the sides. The standard tipper can operate with 200-liter drums. It is possible to adapt the device to drums with different capacities. The mobile base makes it possible to move the device between the halls. Stabilizing feet keep the machine level when it is operating. The tipper for boxes and containers is a device that will definitely improve the efficiency of unloading processes and speed up production processes in your company. Due to the low weight, the tipper can be easily moved "manually" to places where you need help. The mobile base gives the opportunity to adapt the device to the workplace. The B-MB-200 tipper will certainly facilitate the work of your employees, relieving their hands and spines.
Box Tipper B-MS-1000
The B-MS-1000 Box tipper for pallboxes is the most popular model of mobile tippers compatible with 1200x1000mm containers. The B-MS-1000 model is called wide tipper. The container is placed on tipper profiles. This option of placing a container or box on a tipper gives you the opportunity to drive a pallet truck. This machine is dedicated to all 1200x1000mm pallets available on the market, regardless of their height. This tipper can also work with insulated containers type 400, 430, 430, 600, 630, 660, 700 and 1000. Boxlifter tipper for boxes and containers is a device that will definitely improve the efficiency of unloading processes and speed up production processes in your company. Due to the low weight, the tipper can be easily moved "manually" to places where you need help.
Box Tipper B-MC-300
The B-MC-300 mobile tippers are dedicated to 200 and 300-liter dumpers. The tipper mainly serves trolleys/buggies manufactured in accordance with DIN 9797.
The M-MC-300 tipper for boxes and containers is a device that will definitely improve the efficiency of unloading processes and speed up production processes in your company. Due to the low weight, the tipper can be easily moved "manually" to places where you need help. The mobile base gives the opportunity to adapt the device to the workplace. Boxlifter tipper will certainly facilitate the work of your employees, relieving their hands and spines.
Box Tipper B-MS-1200 H1500
The Box Tipper B-MS-1200 H1500 model was based on the B-MS-1200 tipper. The dumping height has been increased to 1500mm. Due to the high load capacity, the tipper can easily empty containers that weigh up to 1200 kg. The device has been equipped with two stainless steel cylinders. This model works with all pallets on the market with a base 1200x1000mm regardless of their height, and with insulated containers type 400, 600, 630 and 700. The Box Tipper B-MS-1200 H1500 tipper for boxes and containers is a device that will definitely improve the efficiency of unloading processes and speed up production processes in your company.
CONTACT & INFORMATION
IP-Group AS
Geir Vidar Persen
Sales Director
Cell phone: +47 960 49 556